Products

TAK Servo Controls & Software Packages

The chart below shows the difference between the three types of control & software packages that TAK offers. Each application will dictate the final system configuration so motors, drives, and control hardware may come from Allen Bradley, G&L, Baldor, Kollmorgan, Square D, or other similar supliers.

These packages are ideally suited when applied to such linear material feeding applications as wire feeding and forming, wire ablation ( coating removal ), wire or strip annealing oven feeding, narrow strip flatening and forming, marking stations, and many others where precision wire or strip feeding is required.

Click any of the three versions marked in Yellow to view the screen data available on each of the three packages.

No	Feature	SF2	Advanced	Basic	Notes
1	Master or Slave Modes of Operation	µ	µ	µ
2	Touch Screen Interface	µ	µ	µ
3	Metric / English Data Entry & Display	µ	µ	µ
4	Acceleration & Deceleration Adjustments	µ	µ	µ
5	System Monitoring & Alarm Package	µ	Limited	Limited
6	Speed Adjustment	µ	µ	µ	SF2 can change speeds within a command sequence
7	Drive Wheel Diameter Compensation	µ	µ	µ
8	Jog Function Capability	µ	µ	µ
9	Forward / Reverse Feed Direction	µ	µ	µ	SF2 can do both within a command sequence
10	Part Preset & Count	µ	µ	µ
11	Batch Preset & Count	µ	µ	µ
12	Data Transfer	Optional	Optional		Ethernet, Rs-232, RS-485
13	Program Addressable I/O	µ	Optional
14	Alarm History	µ	µ
15	Maintenance Count tracking	µ	µ
16	Screen and or System Password Protection	µ	µ
17	Life Count Tracking	µ	µ
18	IO Controlled Compartmentalized Batching	µ	µ
19	Time Controlled or Sensor Controlled I/O Operations	µ	µ
20	On-The-Fly Feed Length Compensation	µ	µ
21	PPM Running Speed	µ	µ
22	Single or Dual Axis Control	µ
23	Electronic Hand Wheel Function	µ
24	1 to 25 Step Menu Program	µ
25	1 to 25 Step Batch Menu Program	µ
26	Program Storage	µ			SF2 up to 100 – A&S are Last Entry Only
27	Program Addressable Remote I/O	µ

| | Share/Bookmark