Videos

.250 dia Hinge Pins @ 30 lengths

Cutting Foil Strips

Dual Belt Tractor on .187 W x .010 T strip

Special Continous 3 Strip Annealing Line

Servo Based Cutting System for Tinned Copper Strip

Servo Based Cutting System for 1/4 dia Rods

On the Fly Cutting Machines

Medical Guide Wire Coiling System

Dual Belt Tractor Feed

Programmable Rotary Wire Straightener

Shown is the roll type outfeed with adjustable speed. A caterpilar style dual belt outfeed is also available.

SBT Brazing Assembly System

SBTM 300 NC System

SBT Injection Molding Module

Colombi C513T CNC In Line Spring Coiler

C200P Pneumatic Spring Coiler

ORBIT In-Line Inspection System

MAXI Spring Separator

Colombi MINI Spring Separator

Colombi MICRO Spring Separator

Colombi BIG Spring Separator

Colombi SpeedFeeder Spring Detangler and delivery system

Colombi Bigmatic

#3 Servo System Processing Tinned Copper Strip

Material is pulled through a precision straightener via a 4 roll feed drive. Strip then passes into a pneumatically actuated cutter head in which it is notched and trimmed to produce a straight cut on one end with notches and chamfered cut on the other. Different cut length are achieved simply but entering the desired length into the touch screen interface.

High Speed Wire Tie Production System

Servo Controlled Straighten, Feed and Cut To Length System

Servo Feed and Abrasive Wheel Cutting System

Servo Feed and Cut System

Feed length, feed speed, number of parts, number of batches, accelleration and deceleration ramping and pause time between feed cycles are all programmable. Systems can be equipped with 2, 4 or 6 roll feed boxes depending upon material characteristics and pull force requirements.

Servo Feed and Processing System

Servo Feed System

Precision Wire Straighteners

C411O CNC Spring Coiler With Gripper Making Torsion Spring

Tie Wire Production System

The wire is pulled through a precision wire straightener to insure straight ties are delivered. A pneumatic feed slide advanced the wire into a cutter head that shears the wire to the required finished length. The tie wire length is adjustable to 12 on a single stroke, and can be programmed via the operator touch screen interface to produce lengths longer than 12 by entering a skip function to cut every other stroke or number of strokes.
Finished Tie Wires can be collected in bulk, or batching can be programmed so that the system will pause after a programmed number of ties are produced.

Pneumatic Feed and Cut Systems

#2 Feed and Cut Running 2 Wires

A high output demand required a pneumatic feed and cut to length system that could deliver more than 300 .125 long x .060 wire blanks per minute. By modifying the standard TAK pneumatic system to accept 2 wires, the production throughput was exceeded.

Wire Feed and Cut System with Enclosure

#2 Feed and Cut High Speed

Precision Cutting Station